OCEOSmp/blank
Next Section
oceos_dataq_create()
Header File
dataq.h
Description
This function creates a data queue with the specified characteristics.Prototype
/** * Create data queue * If use_timeout = TRUE, timed actions must be initialised * * @param dataq_id data queue ID * @param dataq_size data queue size * @param pen_q_size pending jobs queue size * @param roll_over whether to roll over when full * @param use_timeout if TRUE, directive oceos_dataq_read_restart_timeout can be used * * @return OCEOS_SUCCESS * ERR_SYS_FIXED_CORRUPT System Fixed area corrupt * ERR_WRONG_CPU_CORE Executing directive on wrong CPU * ERR_WRONG_PHASE Called before oceos_init() is done * ERR_TOO_MANY MAX number of DATAQs already created * ERR_ID_INVALID DATAQ ID outside allowed range 0 to 62 * ERR_ID_WRONG DATAQ ID >= number of DATAQs * ERR_DQ_ALREADY_ALLOCATED DATAQ ID already used * ERR_DQ_SIZE_WRONG DATAQ size outside allowed range 1 to 255 * ERR_DQ_PENQ_SIZE_WRONG DATAQ pending queue size outside allowed range 1 to 253 * ERR_DQ_TA_MAX_NUM_REACHED Number of timed actions exceeds MAX allowed 255, * each task on DATAQ pending queue is timed action */ S32_t oceos_dataq_create( dataq_t dataq_id, // data queue ID U16_t dataq_size, // data queue size U16_t pen_q_size, // pending jobs queue size BOOLE_t roll_over, // whether to roll over when full BOOLE_t use_timeout // whether timeout is used oceos_dataq_read_restart_timeout );Parameters
Parameter Description dataq_id dataq_t data queue ID (number between 0 and 62) dataq_size data queue size (max number of pointers than can be added to the queue) pen_q_size pending jobs queue size roll_over whether to roll over when full (0 => disabled, 1 => enabled) use_timeout if TRUE, directive oceos_dataq_read_restart_timeout can be used Returns
This function returns an S32_t with a value of OCEOS_SUCCESS (zero) or return code bits set as defined in the table below.
ERR_SYS_FIXED_CORRUPT System Fixed area corrupt ERR_WRONG_CPU_CORE Executing directive on wrong CPU ERR_WRONG_PHASE Called before oceos_init() is done ERR_TOO_MANY MAX number of DATAQs already created ERR_ID_INVALID DATAQ ID outside allowed range 0 to 62 ERR_ID_WRONG DATAQ ID >= number of DATAQs ERR_DQ_ALREADY_ALLOCATED DATAQ ID already used ERR_DQ_SIZE_WRONG DATAQ size outside allowed range 1 to 255 ERR_DQ_PENQ_SIZE_WRONG DATAQ pending queue size outside allowed range 1 to 253 ERR_DQ_TA_MAX_NUM_REACHED Number of timed actions exceeds MAX allowed 255, each task on DATAQ pending queue is timed action Example Usage
S32_t status; ... // Create data queue d_3 with size 20, max pending jobs of 10, rollover enabled, timeouts disabled status = oceos_dataq_create(d_3, 20, 10, 1, 0));
oceos_dataq_write()
Header File
dataq.h
Description
This function puts a non-null pointer on the specified data queue.Prototype
/** * Puts pointer to the data on data queue. * Pointer to the data must not be NULL * * @param dataq_t dataq_id Data queue ID * @param void* data Non-null pointer to data * * @return OCEOS_SUCCESS * WARN_DQ_NOW_FULL Warning, DATAQ is full now * WARN_JOB_NOT_GUARDED * * ERR_SYS_FIXED_CORRUPT System Fixed area corrupt * ERR_SYS_DYN_CORRUPT System Dynamic area corrupt * ERR_WRONG_PHASE Directive was called before OCEOS initialisation is finished * ERR_ID_INVALID DATAQ ID outside allowed range 0 to 62 * ERR_ID_WRONG DATAQ ID >= number of DATAQs * ERR_DQ_DATA_BAD Data pointer is null * ERR_SYS_BUSY Failed to acquire guard * ERR_TOO_MANY DATAQ is full * ERR_DQ_JOB_ID_WRONG Job ID of the task on pending queue is wrong * ERR_TA_NOT_FOUND Timed action index to be removed for job not found * ERR_TA_START_FAILED Timed action re-start failed after job remove from timed action queue */ S32_t oceos_dataq_write( dataq_t dataq_id, // data queue ID void *data // non-null pointer to data );Parameters
Parameter Description dataq_id dataq_t with value of Data queue ID ptr void* pointer to application data (non-null pointer) Returns
This function returns an S32_t with a value of OCEOS_SUCCESS (zero) or return code bits set as defined in the table below.
WARN_DQ_NOW_FULL Warning, DATAQ is full now WARN_JOB_NOT_GUARDED ERR_SYS_FIXED_CORRUPT System Fixed area corrupt ERR_SYS_DYN_CORRUPT System Dynamic area corrupt ERR_WRONG_PHASE Directive was called before OCEOS initialisation is finished ERR_ID_INVALID DATAQ ID outside allowed range 0 to 62 ERR_ID_WRONG DATAQ ID >= number of DATAQs ERR_DQ_DATA_BAD Data pointer is null ERR_SYS_BUSY Failed to acquire guard ERR_TOO_MANY DATAQ is full ERR_DQ_JOB_ID_WRONG Job ID of the task on pending queue is wrong ERR_TA_NOT_FOUND Timed action index to be removed for job not found ERR_TA_START_FAILED Timed action re-start failed after job remove from timed action queue Example Usage
S32_t status; char[100] message_in; ... // Put pointer to message_in on data queue s_2 status = oceos_dataq_write(s_2, (void *)message_in);
oceos_dataq_read_continue()
Header File
dataq.h
Description
This function returns a pointer from the specified data queue.Prototype
/** * Read data queue * * @param dataq_t dataq_id Data queue ID * @param void* data Pointer to data * * @return OCEOS_SUCCESS * ERR_SYS_FIXED_CORRUPT System Fixed area corrupt * ERR_SYS_DYN_CORRUPT System Dynamic area corrupt * ERR_WRONG_PHASE Directive was called before OCEOS initialisation is finished * ERR_ID_INVALID DATAQ ID outside allowed range 0 to 62 * ERR_ID_WRONG DATAQ ID >= number of DATAQs * ERR_SYS_BUSY Failed to acquire guard * ERR_DQ_EMPTY DATAQ empty(count zero) */ S32_t oceos_dataq_read_continue( dataq_t dataq_id, // data queue ID void* *data // return data );Parameters
Parameter Description dataq_id dataq_t with value of Data queue ID ptr void* pointer to store returned data queue pointer removed from the queue Returns
This function returns an S32_t with a value of OCEOS_SUCCESS (zero) or return code bits set as defined in the table below.
ERR_SYS_FIXED_CORRUPT System Fixed area corrupt ERR_SYS_DYN_CORRUPT System Dynamic area corrupt ERR_WRONG_PHASE Directive was called before OCEOS initialisation is finished ERR_ID_INVALID DATAQ ID outside allowed range 0 to 62 ERR_ID_WRONG DATAQ ID >= number of DATAQs ERR_SYS_BUSY Failed to acquire guard ERR_DQ_EMPTY DATAQ empty(count zero) Example Usage
S32_t status; char *data_ptr; ... // Read pointer from data queue s_2 status = oceos_dataq_read_continue(s_2, (void *)data_ptr);
oceos_dataq_read_restart()
Header File
dataq.h
Description
This function returns a pointer from the specified data queue. If the queue is empty, the job is added top the dataq pending queue. The job will be restarted when data is available.Prototype
/** * Read data queue next item. * If dataq is empty, task is put on pending Q for dataq and * restarted by oceos_dataq_write * * @param dataq_id Data queue ID * @param data Pointer to return data * * @return OCEOS_SUCCESS * ERR_SYS_FIXED_CORRUPT System Fixed area corrupt * ERR_SYS_DYN_CORRUPT System Dynamic area corrupt * ERR_WRONG_PHASE Directive was called before OCEOS initialisation is finished * ERR_ID_INVALID DATAQ ID outside allowed range 0 to 62 * ERR_ID_WRONG DATAQ ID >= number of DATAQs * ERR_SYS_BUSY Failed to acquire guard * ERR_DQ_J_START_FROM_TIMOUT Job started from timeout already, DATAQ empty second time * ERR_FAILED Should never return this */ S32_t oceos_dataq_read_restart( dataq_t dataq_id, // data queue ID void* *data // pointer to return data );Parameters
Parameter Description dataq_id dataq_t with value of Data queue ID ptr void* pointer to store returned data queue pointer removed from the queue Returns
This function returns an S32_t with a value of OCEOS_SUCCESS (zero) or return code bits set as defined in the table below.
ERR_SYS_FIXED_CORRUPT System Fixed area corrupt ERR_SYS_DYN_CORRUPT System Dynamic area corrupt ERR_WRONG_PHASE Directive was called before OCEOS initialisation is finished ERR_ID_INVALID DATAQ ID outside allowed range 0 to 62 ERR_ID_WRONG DATAQ ID >= number of DATAQs ERR_SYS_BUSY Failed to acquire guard ERR_DQ_J_START_FROM_TIMOUT Job started from timeout already, DATAQ empty second time ERR_FAILED Should never return this Example Usage
S32_t status; char *data_ptr; ... // Read pointer from data queue s_2 with restart when data is available status = oceos_dataq_read_restart(s_2, (void *)data_ptr);
oceos_dataq_read_restart_timeout()
Header File
dataq.h
Description
This function returns a pointer from the specified data queue. If the queue is empty, the job is added top the dataq pending queue. The job will be restarted either when data is available or the timeout has expired.Prototype
/** * Read data queue next item. * If dataq is empty, task is put on pending Q for dataq and * restarted by oceos_dataq_write or by timeout if timeout != 0 * In order to use this feature timed actions must be configured and * dataq created with use timeout set to true * * @param dataq_id Data queue ID * @param data Pointer to return data * @param timeout Timeout, restart time if no entry, 0 => ignore * * @return OCEOS_SUCCESS * ERR_SYS_FIXED_CORRUPT System Fixed area corrupt * ERR_SYS_DYN_CORRUPT System Dynamic area corrupt * ERR_WRONG_PHASE Directive was called before OCEOS initialisation is finished * ERR_TA_NOT_INIT Timed action intialisation is not done and tried to be used; or DATAQ created without timeouts * ERR_ID_INVALID DATAQ ID outside allowed range 0 to 62 * ERR_ID_WRONG DATAQ ID >= number of DATAQs * ERR_SYS_BUSY Failed to acquire guard * ERR_DQ_EMPTY DATAQ empty(count zero) * ERR_DQ_J_START_FROM_TIMOUT Job started from timeout already, DATAQ empty second time * ERR_TOO_MANY DATAQ pending queue is full * ERR_FAILED Should never return this */ S32_t oceos_dataq_read_restart_timeout( dataq_t dataq_id, // data queue ID void* *data, // Pointer to return data U64_t timeout // timeout, restart time if no entry, 0 => ignore );Parameters
Parameter Description dataq_id dataq_t with value of Data queue ID ptr void* pointer to store returned data queue pointer removed from the queue timeout U64_t containing timeout value, restart time if no entry, 0 => ignore Returns
This function returns an S32_t with a value of OCEOS_SUCCESS (zero) or return code bits set as defined in the table below.
ERR_SYS_FIXED_CORRUPT System Fixed area corrupt ERR_SYS_DYN_CORRUPT System Dynamic area corrupt ERR_WRONG_PHASE Directive was called before OCEOS initialisation is finished ERR_TA_NOT_INIT Timed action intialisation is not done and tried to be used; or DATAQ created without timeouts ERR_ID_INVALID DATAQ ID outside allowed range 0 to 62 ERR_ID_WRONG DATAQ ID >= number of DATAQs ERR_SYS_BUSY Failed to acquire guard ERR_DQ_EMPTY DATAQ empty(count zero) ERR_DQ_J_START_FROM_TIMOUT Job started from timeout already, DATAQ empty second time ERR_TOO_MANY DATAQ pending queue is full ERR_FAILED Should never return this Example Usage
S32_t status; char *data_ptr; ... // Read pointer from data queue s_2 with timeout after 10,000 time units if no data is available status = oceos_dataq_read_restart_timeout(s_2, (void *)data_ptr, 10000ull);
blank_function()
Header File
header.h
Description
This function does xyz...Prototype
S32_t oceosmp_blank( U32_t param );Parameters
Parameter Description param parameter to function Returns
This function returns an S32_t with a value of OCEOS_SUCCESS (zero) or return code bits set as defined in the table below.
Error bit !! Description Example Usage
S32_t status, param; ... // Do xyz status = oceosmp_blank(param));