Difference between revisions of "OCEOSmp/blank"
Jump to navigation
Jump to search
| Line 254: | Line 254: | ||
// Read pointer from data queue s_2 | // Read pointer from data queue s_2 | ||
status = oceos_dataq_read_continue(s_2, (void *)data_ptr); | status = oceos_dataq_read_continue(s_2, (void *)data_ptr); | ||
</syntaxhighlight> | </syntaxhighlight> | ||
</blockquote> | </blockquote> | ||
Revision as of 16:04, 1 May 2024
Next Section
oceos_dataq_create()
Header File
dataq.h
Description
This function creates a data queue with the specified characteristics.Prototype
/** * Create data queue * If use_timeout = TRUE, timed actions must be initialised * * @param dataq_id data queue ID * @param dataq_size data queue size * @param pen_q_size pending jobs queue size * @param roll_over whether to roll over when full * @param use_timeout if TRUE, directive oceos_dataq_read_restart_timeout can be used * * @return OCEOS_SUCCESS * ERR_SYS_FIXED_CORRUPT System Fixed area corrupt * ERR_WRONG_CPU_CORE Executing directive on wrong CPU * ERR_WRONG_PHASE Called before oceos_init() is done * ERR_TOO_MANY MAX number of DATAQs already created * ERR_ID_INVALID DATAQ ID outside allowed range 0 to 62 * ERR_ID_WRONG DATAQ ID >= number of DATAQs * ERR_DQ_ALREADY_ALLOCATED DATAQ ID already used * ERR_DQ_SIZE_WRONG DATAQ size outside allowed range 1 to 255 * ERR_DQ_PENQ_SIZE_WRONG DATAQ pending queue size outside allowed range 1 to 253 * ERR_DQ_TA_MAX_NUM_REACHED Number of timed actions exceeds MAX allowed 255, * each task on DATAQ pending queue is timed action */ S32_t oceos_dataq_create( dataq_t dataq_id, // data queue ID U16_t dataq_size, // data queue size U16_t pen_q_size, // pending jobs queue size BOOLE_t roll_over, // whether to roll over when full BOOLE_t use_timeout // whether timeout is used oceos_dataq_read_restart_timeout );Parameters
Parameter Description dataq_id dataq_t data queue ID (number between 0 and 62) dataq_size data queue size (max number of pointers than can be added to the queue) pen_q_size pending jobs queue size roll_over whether to roll over when full (0 => disabled, 1 => enabled) use_timeout if TRUE, directive oceos_dataq_read_restart_timeout can be used Returns
This function returns an S32_t with a value of OCEOS_SUCCESS (zero) or return code bits set as defined in the table below.
ERR_SYS_FIXED_CORRUPT System Fixed area corrupt ERR_WRONG_CPU_CORE Executing directive on wrong CPU ERR_WRONG_PHASE Called before oceos_init() is done ERR_TOO_MANY MAX number of DATAQs already created ERR_ID_INVALID DATAQ ID outside allowed range 0 to 62 ERR_ID_WRONG DATAQ ID >= number of DATAQs ERR_DQ_ALREADY_ALLOCATED DATAQ ID already used ERR_DQ_SIZE_WRONG DATAQ size outside allowed range 1 to 255 ERR_DQ_PENQ_SIZE_WRONG DATAQ pending queue size outside allowed range 1 to 253 ERR_DQ_TA_MAX_NUM_REACHED Number of timed actions exceeds MAX allowed 255, each task on DATAQ pending queue is timed action Example Usage
S32_t status; ... // Create data queue d_3 with size 20, max pending jobs of 10, rollover enabled, timeouts disabled status = oceos_dataq_create(d_3, 20, 10, 1, 0));
oceos_dataq_write()
Header File
dataq.h
Description
This function puts a non-null pointer on the specified data queue.Prototype
/** * Puts pointer to the data on data queue. * Pointer to the data must not be NULL * * @param dataq_t dataq_id Data queue ID * @param void* data Non-null pointer to data * * @return OCEOS_SUCCESS * WARN_DQ_NOW_FULL Warning, DATAQ is full now * WARN_JOB_NOT_GUARDED * * ERR_SYS_FIXED_CORRUPT System Fixed area corrupt * ERR_SYS_DYN_CORRUPT System Dynamic area corrupt * ERR_WRONG_PHASE Directive was called before OCEOS initialisation is finished * ERR_ID_INVALID DATAQ ID outside allowed range 0 to 62 * ERR_ID_WRONG DATAQ ID >= number of DATAQs * ERR_DQ_DATA_BAD Data pointer is null * ERR_SYS_BUSY Failed to acquire guard * ERR_TOO_MANY DATAQ is full * ERR_DQ_JOB_ID_WRONG Job ID of the task on pending queue is wrong * ERR_TA_NOT_FOUND Timed action index to be removed for job not found * ERR_TA_START_FAILED Timed action re-start failed after job remove from timed action queue */ S32_t oceos_dataq_write( dataq_t dataq_id, // data queue ID void *data // non-null pointer to data );Parameters
Parameter Description dataq_id dataq_t with value of Data queue ID ptr void* pointer to application data (non-null pointer) Returns
This function returns an S32_t with a value of OCEOS_SUCCESS (zero) or return code bits set as defined in the table below.
WARN_DQ_NOW_FULL Warning, DATAQ is full now WARN_JOB_NOT_GUARDED ERR_SYS_FIXED_CORRUPT System Fixed area corrupt ERR_SYS_DYN_CORRUPT System Dynamic area corrupt ERR_WRONG_PHASE Directive was called before OCEOS initialisation is finished ERR_ID_INVALID DATAQ ID outside allowed range 0 to 62 ERR_ID_WRONG DATAQ ID >= number of DATAQs ERR_DQ_DATA_BAD Data pointer is null ERR_SYS_BUSY Failed to acquire guard ERR_TOO_MANY DATAQ is full ERR_DQ_JOB_ID_WRONG Job ID of the task on pending queue is wrong ERR_TA_NOT_FOUND Timed action index to be removed for job not found ERR_TA_START_FAILED Timed action re-start failed after job remove from timed action queue Example Usage
S32_t status; char[100] message_in; ... // Put pointer to message_in on data queue s_2 status = oceos_dataq_write(s_2, (void *)message_in);
oceos_dataq_read_continue()
Header File
dataq.h
Description
This function returns a pointer from the specified data queue.Prototype
/** * Read data queue * * @param dataq_t dataq_id Data queue ID * @param void* data Pointer to data * * @return OCEOS_SUCCESS * ERR_SYS_FIXED_CORRUPT System Fixed area corrupt * ERR_SYS_DYN_CORRUPT System Dynamic area corrupt * ERR_WRONG_PHASE Directive was called before OCEOS initialisation is finished * ERR_ID_INVALID DATAQ ID outside allowed range 0 to 62 * ERR_ID_WRONG DATAQ ID >= number of DATAQs * ERR_SYS_BUSY Failed to acquire guard * ERR_DQ_EMPTY DATAQ empty(count zero) */ S32_t oceos_dataq_read_continue( dataq_t dataq_id, // data queue ID void* *data // return data );Parameters
Parameter Description dataq_id dataq_t with value of Data queue ID ptr void* pointer to store returned data queue pointer removed from the queue Returns
This function returns an S32_t with a value of OCEOS_SUCCESS (zero) or return code bits set as defined in the table below.
ERR_SYS_FIXED_CORRUPT System Fixed area corrupt ERR_SYS_DYN_CORRUPT System Dynamic area corrupt ERR_WRONG_PHASE Directive was called before OCEOS initialisation is finished ERR_ID_INVALID DATAQ ID outside allowed range 0 to 62 ERR_ID_WRONG DATAQ ID >= number of DATAQs ERR_SYS_BUSY Failed to acquire guard ERR_DQ_EMPTY DATAQ empty(count zero) Example Usage
S32_t status; char *data_ptr; ... // Read pointer from data queue s_2 status = oceos_dataq_read_continue(s_2, (void *)data_ptr);
oceos_dataq_read_restart()
Header File
dataq.h
Description
This function returns a pointer from the specified data queue. If the queue is empty, the job is added top the dataq pending queue. The job will be restarted when data is available.Prototype
/** * Read data queue next item. * If dataq is empty, task is put on pending Q for dataq and * restarted by oceos_dataq_write * * @param dataq_id Data queue ID * @param data Pointer to return data * * @return OCEOS_SUCCESS * ERR_SYS_FIXED_CORRUPT System Fixed area corrupt * ERR_SYS_DYN_CORRUPT System Dynamic area corrupt * ERR_WRONG_PHASE Directive was called before OCEOS initialisation is finished * ERR_ID_INVALID DATAQ ID outside allowed range 0 to 62 * ERR_ID_WRONG DATAQ ID >= number of DATAQs * ERR_SYS_BUSY Failed to acquire guard * ERR_DQ_J_START_FROM_TIMOUT Job started from timeout already, DATAQ empty second time * ERR_FAILED Should never return this */ S32_t oceos_dataq_read_restart( dataq_t dataq_id, // data queue ID void* *data // pointer to return data );Parameters
Parameter Description dataq_id dataq_t with value of Data queue ID ptr void* pointer to store returned data queue pointer removed from the queue Returns
This function returns an S32_t with a value of OCEOS_SUCCESS (zero) or return code bits set as defined in the table below.
ERR_SYS_FIXED_CORRUPT System Fixed area corrupt ERR_SYS_DYN_CORRUPT System Dynamic area corrupt ERR_WRONG_PHASE Directive was called before OCEOS initialisation is finished ERR_ID_INVALID DATAQ ID outside allowed range 0 to 62 ERR_ID_WRONG DATAQ ID >= number of DATAQs ERR_SYS_BUSY Failed to acquire guard ERR_DQ_J_START_FROM_TIMOUT Job started from timeout already, DATAQ empty second time ERR_FAILED Should never return this Example Usage
S32_t status; char *data_ptr; ... // Read pointer from data queue s_2 with restart when data is available status = oceos_dataq_read_restart(s_2, (void *)data_ptr);
blank_function()
Header File
header.h
Description
This function does xyz...Prototype
S32_t oceosmp_blank( U32_t param );Parameters
Parameter Description param parameter to function Returns
This function returns an S32_t with a value of OCEOS_SUCCESS (zero) or return code bits set as defined in the table below.
Error bit !! Description Example Usage
S32_t status, param; ... // Do xyz status = oceosmp_blank(param));